A Readers Dream Chair: How To Build A Bookshelf Chair
Step 6: First floor
Closeups of completed first level sides
Step 7: Seating area and sides
I did not take any pictures of adding horizontal seating area piece but it is same size square piece of plywood like the base piece and it was glued down only.
Next I started with upper bookshelf slots with 2 x2 in pines. To secure them I used the same method of Kreg pocket screws and wood glue. The seating area is 28.5″ long and 26″ wide.
Step 8: Bookshelf sides
Closeup of bookshelf slats and how pocket screws were used to interlock each piece of 2×2 pine to each other.
Step 9: Top and side View
Top and side view of completed sides
Step 10: Back same as sides
View of the back as it was built using 2×2
Step 11: Slowly coming together with sides and back
Different views of completed slats for the back side of the chair
Step 12: Top shelf
Next I cut out the plywood to fill in support for the all top three sides of the bookshelf chair. As you see, I used clamps to secure it better to the seating area while wood glue dried.
Step 13: Almost done
Finally, we have pics of completed unpainted bookshelf chair.
Step 14: Lets Paint
For the color, I had my wife choose the wild color of her choice.
Step 15: Lets wrap it up
Finally, cushions where a custom made by my mother in law to tie it all up.
Bring on the books and the reading enjoyment.
Thank you for checking out my project. To see more of my work visit Darko.us